VIOFO Support Center

VIOFO WR1 Car Dash Camera Firmware

Latest WR1 firmware is released on 2018.11.20, the version number is V1.8, below is the download link, or check the attachment:

WR1 V1.8 Firmware

Change log:

  • Added: Support set / get Car License number and Custom Stamp
  • Added: Support get/change SSID, Password
  • Updated: Long press power button to disable/enable Wi-Fi, Wi-Fi is enabled by default.

How to update WR1 Dash Cam Firmware:

Please do the following to upgrade the dashcam:

  1.          Use Micro SD card formatted by camera or on the computer as FAT32.
  2.          Insert the card in the camera and connect it to the computer using a USB cable.
  3.          Copy just the FWWR1.bin on the root of the card.
  4.          After FWWR1.bin is copied to the card disconnect the camera from the computer.
  5.          Reconnect the camera to your computer and wait a few seconds until the camera is powered on. The front red LED will be blinking while upgrading.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.