VIOFO Support Center

VIOFO A119 Pro Car Dash Camera Firmware

Latest A119 Pro firmware is released , version number is V1.31, below is the download link, or check the attachment:


A119 Pro V1.31 Firmware


Change log:

  • 1. Fixed: Random screen freezing issue.
  • 2. Changed: Beep will be totally off, if set Beep Off in system settings.
  • 3. Added: Boot Delay options.
  • 4. Updated: Mass storage changed to "microSD Card Reader Mode"


Please do the following to upgrade the dash cam

The firmware will be automatically deleted from Micro SD card after upgrade completed.


  1.          Use a memory card (recommend 16GB-128GB memory card) formatted by camera or on computer as FAT32
  2.          Insert card in camera and connect it to computer using USB cable
  3.          Copy the FWA119P.bin on the root of the card
  4.          After FWA119P.bin is copied to the card disconnect the camera from computer
  5.          Reconnect the camera to your computer and wait few seconds until the camera restart.

        The front red LED will be blinking while upgrading.


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.