VIOFO Support Center

VIOFO A129 Pro IR Duo Dash Camera Firmware

Latest A129 Pro IR Duo Dash Camera firmware is released, the version number is V1.0.

This firmware is for A129 Pro Infrared version, the Infraid Interior camera is for recording inside, not for rear. 



How to update: 


Please do the following to upgrade the dash cam:

  1. Use a memory card (recommend 16GB-128GB memory card) formatted by camera or on the computer as FAT32
  2. Insert the card in the camera and connect it to the computer using the USB cable
  3. Copy just the LDA129P.bin on the root of the card. You can download the LDA129P.bin via the link below:
    https://drive.google.com/file/d/15ZIngYx6__UTmce76zobu1V2fdb2TfrC/view

  4. After LDA129P.bin is copied to the card disconnect the camera from the computer

  5. Reconnect the camera to your computer and wait a few seconds.      

  6. Delete LDA129P.bin from the card using your PC and        

  7. Copy the FA129PIR.bin file on the root of the card. You can download the FA129PIR.bin via the link below:  
    https://drive.google.com/file/d/19MCW4bPcNV551rbxArR-f7i5Gqx8w0s1/view

  8. After FA129PIR.bin is copied to the card disconnect the camera from the computer, reconnect the camera to your computer and wait a few seconds until the camera restart.

      The front red LED will be blinking while upgrading.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.