VIOFO Support Center

VIOFO T130 Dash Camera Firmware

The first official firmware for the T130 Dash Camera is released. The version number is T130_ V1.1_ 20220211. Please download the attached.

V1.1 T130 front camera firmware changelog: 

Changelog: 1. Optimize infrared LEDs auto-change feature; 

                  2. Fix bug  


How to update the T130 dash camera?

  1.  Use a memory card (recommend 16GB-128GB memory card) formatted by camera or on the computer to FAT32.
  2.  Copy the attached FWT130A file to the root of the card. (Parallel to the DCIM folder)
  3.  Power the camera and the REC will flash rapidly when it is updating,
  4. The bin file will be automatically deleted after the update


Note: if you use the short cable and power by PC, the cam will enter card reader mode after the update. 

EthcamTxFW is for the rear camera firmware update,  you can ignore it if you do not want to update the rear camera, in case you do, just download it and do similar procedures as the front camera update,(make sure the rear cam is plugged this time,)

below is a video demonstrating how to update. 



Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.